网址：www.lcmplg.com 2019-07-02 作者：admin 阅读：
Characteristics of Medium Frequency Induction Heating Furnace Series Diathermic Furnace
Medium frequency furnace series diathermy furnace features: fast heating speed, high production efficiency, less oxidation decarbonization, saving material and forging die cost
Because the principle of medium frequency induction heating is electromagnetic induction, its heat is www.jianzhuqicai.com www.meiliwudao.com www.ejyhg.com www.yuniguhua.com www.hbbonate.com.cn www.zhixuedai.netgenerated in the workpiece itself. Ordinary workers can carry out continuous work of forging task in 10 minutes after working with medium frequency induction furnace. No professional workers need to burn and seal the furnace in advance. There is no need to worry about waste of billet heated by coal stove due to power failure or equipment failure. Because of the fast heating speed, the oxidation rate is very little. Compared with coal-fired furnace, the forging can save at least 20-50 kg of raw steel, and the material utilization rate can reach 95%. Because the heating method is uniform and the temperature difference between the core and the surface is very small, the service life of the forging die is greatly increased in forging, and the roughness of the forging surface is also less than 50 um.
Superior working environment, improving workers'working environment and company image, pollution-free and low energy consumption
Compared with coal stove, induction heating furnace will not be baked and smoked by coal stove under the scorching sun any more. It can meet the requirements of environmental protection department and set up the company's external image and the future development trend of forging industry. Induction heating is the most energy-saving heating method in electric heating furnace. The power consumption of forgings from room temperature to 1100 C is less than 360 degrees.
Uniform heating, minimal temperature difference between core and surface, high precision of temperature control
Induction heating produces its own heat in the workpiece, so the heating is uniform and the temperature difference between the core and the surface is very small. The application of temperature control system can achieve accurate temperature control and improve product quality and qualified rate.